..
HpA6643frJ?
JS94
création disques reinstallation: lire:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01904662&lc=fr&dlc=fr&cc=ch#N126
20130427
on dit que c'est terminé
- à confirmer après ouverture de session windows avec le bon pwd
- les deux disques sous enveloppes ("Sutter Ok" et "Sutter panne") au dessus porte douche
- berceau refixé avec 2 vis origine à champigny
- 4 vis pour fixer le disque dans le berceau sous enveloppe minefi, tiroir du bureau, au lac
- laissé sur place la sauvegarde originale par vista sur disque usb 2.4"
historique pour archives
20130417 GAFFE: lu:
http://www.wdc.com/wdproducts/library/Flyer/FRA/2579-771501.pdf
201304143
par téléphone,
coller photo si possible
message windows demandant de changer de disque (C et D et donne bien le modèle 500 Go)
devis: a priori disque interne 3.5" de 640 Go à 1 To entre 60 et 80 €
exemple:
http://www.grosbill.com/4-western_digital_caviar_green_1_to_sata_6go_s_64_mo_cache_wd10ezrx-160916-informatique-_disque_dur
GAFFE: normalement par de souci si taille secteur 4K (au mieux de 512) car on est en VISTA>=SP1
(lire:
http://www.seagate.com/fr/fr/tech-insights/advanced-format-4k-sector-hard-drives-master-ti/ )
feuille de route (1):
- ne pas éteindre
- sauvegarde par windows sur un disque Usb "suffisant" (disque 640 Go, voir si plein , sinon, utiliser 500 ci dessous
- vérifier si fichiers sont relisibles ?
- restauration sur un autre disque sata 3.5 de 640 Go ou plus (2) ci dessous
évaluation ws Element 500 Go + câble Galaxy s/N: WXA1A90P66599
- 11 Go Port2012?
- 3.56 Go: image Gadea
- 8.5 Go du 20121123
libre: 442 Go
feuille de route (2);:
- recopier sur un disque 3.5, 640 Go ou plus (GAFFE à taille secteur)
cdbootable pour récup:
http://www.commentcamarche.net/faq/13735-vista-console-de-recuperation-sur-cd-bootable
voir Kit HP, 40 € :retrouvé, mais finit en erreur ci dessous
20130415:
essai restauration de la sauvegarde par windows sur un disque annexe
ECHEC: les dossiers ne sont pas recnstruits
lu sur le web que c'est comme ça
essai du pack de réinstalation HP,
ECHEC erreur 1005
webographie:
lu:
http://www.forum-vista.net/forum/topic15038.html
http://h30434.www3.hp.com/t5/Desktop-Hardware/error-1005/td-p/153391
voir plus bas console de la copie (signale UNE ereur aux envitron de 60 Go)
et de smartctl.: donne nb d'heures de vol et le nb de secteurs ré-alloués dépassés!
20130415-soir
impossible de démarrer sur le disque copié (bien vu du menu boot et bios, mais reste sur écran noir!)
fdisk signale mauvais aligement
effectivement partition commence à 63!
repris les deux disques
20130416
- partitionnement du disque 1 To sous Windows vista avec la commande diskpart
- donne un départ à 1024 (Mo)
- tag 7 des deux et activate 1 sous fdisk
- copie de chaque partition par dd conv=noerror 10:00 copie de partition 1 en cours, durée approx: 5 à 6 heures.
miracle: on ne voit plus l'erreur à 60 Go!
Ooooops, avant ola sieste,
lexcteur usb perdu
dd patine à adresse 222 Go, ???
coller photo
relancé avec skip=400000000 seek=400000000 (sauf erreur copier au delà de 200 Go)
14:00 copie toujours, 100 Go depuis la relance (donc on doit être aux alentours de 300 Go)
16:
pas boot
fdisk rapporte bien origine 2048
gparted ne signame plus d'ertrteurs
monyé sous windows et lancé chkdsk, Ok
observé: smartctl de windows dit pas activé
smartclt de knoppix Ok, sortie plus bas.
posé la question sur forum HP.
un réponse générale, wait & see.
il reste des 500 Go Seagate:
http://www.amazon.fr/Seagate-ST500DM002-Barracuda-Disque-interne/dp/B005F306RY
loupé achat faute à mon CCV2
21:00
un petit mieux,
boot sur le disque 1TO donne un mesage d'erreur
à peu près:
A disk read error occurred
Press Ctrl+Alt+ el to restart
manque la lettre D)
ce message est dans le premier secteur de la partition bootable
20130417
examiné le premier secteur en linux (dd et od)
les seuls messages présents sont:
- ERR1
- ERR2
- ERR3
- Press F1 for Emergency recovery
par contre dans le secteur 2048:
je trouve le message d'erreur affiché (1)
achat disque 500 go seagate Barracuda Firmware KC45 /N: W2APCP56
plus fin que l'original
47 € chez Galaxy Computer, 30 rue Montgallet.
copie par dd de knoppix, bs=512, a pas mal ramé aux alentoures de 60 Go, ok pour le reste
voir photos dossier du 1To ex
DellE520
(1)
0000000 353 R 220 N T F S \0 002 \b \0 \0
0000020 \0 \0 \0 \0 \0 370 \0 \0 ? \0 377 \0 ? \0 \0 \0
0000040 \0 \0 \0 \0 200 \0 200 \0 365 023 ~ 8 \0 \0 \0 \0
0000060 \0 \0 \f \0 \0 \0 \0 \0 200 \a d \0 \0 \0 \0 \0
0000100 366 \0 \0 \0 001 \0 \0 \0 251 261 7 344 354 7 344 362
0000120 \0 \0 \0 \0 372 3 300 216 320 274 \0 | 373 h 300 \a
0000140 037 036 h f \0 313 210 026 016 \0 f 201 > 003 \0 N
0000160 T F S u 025 264 A 273 252 U 315 023 r \f 201 373
0000200 U 252 u 006 367 301 001 \0 u 003 351 322 \0 036 203 354
0000220 030 h 032 \0 264 H 212 026 016 \0 213 364 026 037 315 023
0000240 237 203 304 030 236 X 037 r 341 ; 006 \v \0 u 333 243
0000260 017 \0 301 . 017 \0 004 036 Z 3 333 271 \0 + 310
0000300 f 377 006 021 \0 003 026 017 \0 216 302 377 006 026 \0 350
0000320 @ \0 + 310 w 357 270 \0 273 315 032 f # 300 u -
0000340 f 201 373 T C P A u $ 201 371 002 001 r 036 026
0000360 h \a 273 026 h p 016 026 h \t \0 f S f S f
0000400 U 026 026 026 h 270 001 f a 016 \a 315 032 351 j 001
0000420 220 220 f ` 036 006 f 241 021 \0 f 003 006 034 \0 036
0000440 f h \0 \0 \0 \0 f P 006 S h 001 \0 h 020 \0
0000460 264 B 212 026 016 \0 026 037 213 364 315 023 f Y [ Z
0000500 f Y f Y 037 017 202 026 \0 f 377 006 021 \0 003 026
0000520 017 \0 216 302 377 016 026 \0 u 274 \a 037 f a 303 240
0000540 370 001 350 \b \0 240 373 001 350 002 \0 353 376 264 001 213
0000560 360 254 < \0 t \t 264 016 273 \a \0 315 020 353 362 303
0000600 \r \n A d i s k r e a d e r
0000620 r o r o c c u r r e d \0 \r \n B
0000640 O O T M G R i s m i s s i n
0000660 g \0 \r \n B O O T M G R i s c
0000700 o m p r e s s e d \0 \r \n P r e s
0000720 s C t r l + A l t + D e l t
0000740 o r e s t a r t \r \n \0 \0 \0 \0 \0
0000760 \0 \0 \0 \0 \0 \0 \0 \0 200 235 262 312 \0 \0 U 252
0001000
pour info, le MBR du disque:
0000000 3 377 276 \0 002 216 327 274 \0 z 273 240 \a 213 316 216
0000020 333 216 303 363 244 352 ] \0 240 \a 020 \0 001 \0 \0 |
0000040 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \f f 213 U \b 264
0000060 B 306 006 037 \0 | 2 300 f 211 026 " \0 276 032 \0
0000100 262 200 315 023 017 202 315 \0 201 > 376 003 U 252 303 254
0000120 \n 300 t 372 264 016 273 \a \0 315 020 353 362 213 351 213
0000140 331 306 006 * \0 \f 277 356 001 271 004 \0 8 m 004 t
0000160 7 350 267 377 u 037 f 270 R E C O f 9 006 003
0000200 002 t \f f 9 006 360 003 u \v 306 006 * \0 \a 213
0000220 337 306 E 004 022 212 E 004 < \a t \n < \v t 006
0000240 $ 365 < 004 u 002 213 357 210 - 203 357 020 342 275 \v
0000260 333 t = \v 355 t 9 213 373 366 006 m 001 004 u v
0000300 366 006 m 001 002 u s 264 021 315 026 u \ 212 026 l
0000320 001 \n 322 t e 376 312 x 027 6 212 016 l 004 200 301
0000340 022 264 021 315 026 u B 6 : 016 l 004 u 363 353 345
0000360 f 3 322 350 9 377 261 004 277 276 003 200 = 200 t ^
0000400 203 307 020 342 366 261 004 277 276 003 200 } 004 \0 u N
0000420 203 307 020 342 365 213 6 p 001 350 3 377 213 6 r 001
0000440 350 , 377 264 \0 315 026 315 030 264 020 315 026 < r t
0000460 005 200 374 205 u 272 213 357 353 \a 366 006 m 001 020 t
0000500 006 240 * \0 210 E 004 213 375 306 005 200 200 & m 001
0000520 371 f 3 322 306 006 037 \0 z 264 C 350 330 376 350 312
0000540 376 213 6 n 001 u 262 352 \0 | \0 \0 001 021 v 001
0000560 { 001 202 001 207 001 E r r 2 \0 \r \n E r r
0000600 1 \0 E r r 3 \0 \r \n P r e s s F
0000620 1 1 f o r E m e r g e n c y
0000640 R e c o v e r y \0 s a k
0000660 e y \r \n \0 \0 l 001 2 362 I 025 \0 \0 200
0000700 ! \0 \a 376 377 377 \0 \b \0 \0 \0 \0 \t = \0 376
0000720 377 377 \a 376 377 377 \0 \b \t = \0 \0 q 002 \0 \0
0000740 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0
0000760 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 U 252
0001000
autre réponse forum hp:
http://h30478.www3.hp.com/t5/Ordinateurs-de-bureau-et-moniteurs-Mat%C3%A9riel/Utilisation-d-un-disque-dur-avec-des-secteurs-de-4096-un-WD/m-p/237466#M14302
copie par dd sous knoppix 7.04 CD
dtétecter UNE erreur:
Script started on dim. 14 avril 2013 14:00:14 UTC
[32;40mknoppix@Microknoppix:~$[00m sudo dd if=/dev/sdf of=/dev/sda conv=noerror
1015761+0 enregistrements lus
1015761+0 enregistrements écrits
520069632 octets (520 MB) copiés, 18,7524 s, 27,7 MB/s
24042137+0 enregistrements lus
24042137+0 enregistrements écrits
12309574144 octets (12 GB) copiés, 566,485 s, 21,7 MB/s
dd: lecture de « /dev/sdf »: Erreur d'entrée/sortie
117082056+0 enregistrements lus
117082056+0 enregistrements écrits
59946012672 octets (60 GB) copiés, 2991,25 s, 20,0 MB/s
751269560+0 enregistrements lus
751269559+0 enregistrements écrits
384650014208 octets (385 GB) copiés, 18249,3 s, 21,1 MB/s
766131833+0 enregistrements lus
766131833+0 enregistrements écrits
392259498496 octets (392 GB) copiés, 18594,5 s, 21,1 MB/s
796154536+0 enregistrements lus
796154535+0 enregistrements écrits
407631121920 octets (408 GB) copiés, 19303,4 s, 21,1 MB/s
808004264+0 enregistrements lus
808004263+0 enregistrements écrits
413698182656 octets (414 GB) copiés, 19579,2 s, 21,1 MB/s
976773167+0 enregistrements lus
976773167+0 enregistrements écrits
500107861504 octets (500 GB) copiés, 23602,9 s, 21,2 MB/s
[32;40mknoppix@Microknoppix:~$[00m exit
exit
Script done on dim. 14 avril 2013 20:54:57 UTC
et aussi l'analyse par
smartctl:
smartctl 5.43 2012-06-05 r3561 [i686-linux-3.4.9] (local build)
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.11
Device Model: ST3500620AS
Serial Number: 9QM6M89G
LU WWN Device Id: 5 000c50 00dc37320
Firmware Version: SD1A
User Capacity: 500 107 862 016 bytes [500 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 4
Local Time is: Mon Apr 15 08:07:36 2013 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: FAILED!
Drive failure expected in less than 24 hours. SAVE ALL DATA.
See vendor-specific Attribute list for failed Attributes.
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 650) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 119) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x103b) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 100 090 006 Pre-fail Always - 17008708
3 Spin_Up_Time 0x0002 095 092 000 Old_age Always - 0
4 Start_Stop_Count 0x0032 080 080 000 Old_age Always - 20533
5 Reallocated_Sector_Ct 0x0033 031 031 036 Pre-fail Always FAILING_NOW 1414
7 Seek_Error_Rate 0x000f 080 060 030 Pre-fail Always - 22093584106
9 Power_On_Hours 0x0032 085 085 000 Old_age Always - 13833
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 49
12 Power_Cycle_Count 0x0033 089 037 020 Pre-fail Always - 12002
184 End-to-End_Error 0x0033 100 100 097 Pre-fail Always - 0
187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 116
188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 076 051 045 Old_age Always - 24 (Min/Max 21/24)
194 Temperature_Celsius 0x0022 024 049 000 Old_age Always - 24 (0 9 0 0 0)
195 Hardware_ECC_Recovered 0x001a 036 016 000 Old_age Always - 17008708
196 Reallocated_Event_Count 0x0033 100 100 036 Pre-fail Always - 0
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 200 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 127 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 127 occurred at disk power-on lifetime: 13826 hours (576 days + 2 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 cf 87 fa 06 Error: UNC at LBA = 0x06fa87cf = 117082063
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 c8 87 fa e6 00 01:29:58.813 READ DMA EXT
25 00 08 c0 87 fa e6 00 01:29:58.795 READ DMA EXT
25 00 08 b8 87 fa e6 00 01:29:58.670 READ DMA EXT
25 00 08 58 87 fa e6 00 01:29:58.619 READ DMA EXT
25 00 08 50 87 fa e6 00 01:29:58.616 READ DMA EXT
Error 126 occurred at disk power-on lifetime: 13826 hours (576 days + 2 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 cd 87 fa 06 Error: UNC at LBA = 0x06fa87cd = 117082061
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 f0 50 87 fa e6 00 01:29:54.736 READ DMA EXT
25 00 10 40 87 fa e6 00 01:29:54.734 READ DMA EXT
25 00 f0 50 86 fa e6 00 01:29:54.730 READ DMA EXT
25 00 10 40 83 fa e6 00 01:29:54.717 READ DMA EXT
25 00 f0 50 82 fa e6 00 01:29:54.281 READ DMA EXT
Error 125 occurred at disk power-on lifetime: 13825 hours (576 days + 1 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 cd 87 fa 06 Error: UNC at LBA = 0x06fa87cd = 117082061
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 c8 87 fa e6 00 00:33:12.231 READ DMA EXT
25 00 08 c8 87 fa e6 00 00:33:09.122 READ DMA EXT
25 00 08 c0 87 fa e6 00 00:33:09.121 READ DMA EXT
25 00 08 80 87 fa e6 00 00:33:09.113 READ DMA EXT
25 00 08 78 87 fa e6 00 00:33:09.056 READ DMA EXT
Error 124 occurred at disk power-on lifetime: 13825 hours (576 days + 1 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 cd 87 fa 06 Error: UNC at LBA = 0x06fa87cd = 117082061
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 c8 87 fa e6 00 00:33:09.122 READ DMA EXT
25 00 08 c0 87 fa e6 00 00:33:09.121 READ DMA EXT
25 00 08 80 87 fa e6 00 00:33:09.113 READ DMA EXT
25 00 08 78 87 fa e6 00 00:33:09.056 READ DMA EXT
25 00 08 70 87 fa e6 00 00:33:09.056 READ DMA EXT
Error 123 occurred at disk power-on lifetime: 13825 hours (576 days + 1 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 cc 87 fa 06 Error: UNC at LBA = 0x06fa87cc = 117082060
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 10 e0 82 fa e6 00 00:33:05.093 READ DMA EXT
25 00 f0 f0 81 fa e6 00 00:33:03.659 READ DMA EXT
25 00 10 e0 81 fa e6 00 00:33:03.459 READ DMA EXT
25 00 f0 f0 80 fa e6 00 00:33:03.232 READ DMA EXT
25 00 10 e0 80 fa e6 00 00:33:03.230 READ DMA EXT
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Interrupted (host reset) 00% 13215 -
# 2 Short offline Interrupted (host reset) 00% 12847 -
# 3 Short offline Interrupted (host reset) 00% 12439 -
# 4 Short offline Completed: electrical failure 90% 11953 0
# 5 Short offline Interrupted (host reset) 00% 11581 -
# 6 Short offline Interrupted (host reset) 00% 11171 -
# 7 Short offline Interrupted (host reset) 00% 10775 -
# 8 Short offline Interrupted (host reset) 00% 10517 -
# 9 Short offline Interrupted (host reset) 00% 10322 -
#10 Short offline Completed without error 00% 10177 -
#11 Short offline Completed without error 00% 9973 -
#12 Short offline Interrupted (host reset) 00% 9674 -
#13 Short offline Completed without error 00% 9332 -
#14 Short offline Completed without error 00% 8916 -
#15 Short offline Completed without error 00% 8546 -
#16 Short offline Completed without error 00% 8285 -
#17 Short offline Completed without error 00% 8026 -
#18 Short offline Completed without error 00% 7707 -
#19 Short offline Completed without error 00% 7598 -
#20 Short offline Completed without error 00% 7448 -
#21 Short offline Completed without error 00% 7248 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
smartctl du 1 to Wd:
smartctl 5.43 2012-06-05 r3561 [i686-linux-3.4.9] (local build)
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Device Model: WDC WD10EZRX-00A8LB0
Serial Number: WD-WCC1U0220094
LU WWN Device Id: 5 0014ee 25d2436a9
Firmware Version: 01.01A01
User Capacity: 1 000 204 886 016 bytes [1,00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Tue Apr 16 19:00:47 2013 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x80) Offline data collection activity
was never started.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (12180) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 139) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x30b5) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0027 136 135 021 Pre-fail Always - 4175
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 15
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 18
10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 15
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 26
193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 122
194 Temperature_Celsius 0x0022 115 101 000 Old_age Always - 28
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short captive Completed without error 00% 10 -
# 2 Extended captive Interrupted (host reset) 90% 9 -
# 3 Short offline Completed without error 00% 9 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.