AntiGuide:Esp8266NodeMcuWebServerTRVB

#include <ESP8266WiFi.h>

#define VERSION "20161212 see: <A href=\"http://antiguide.free.fr/wiki/wakka.php?wiki=Esp8266NodeMcuWebServerTRVB\">here</a>"
const char* ssid = "lelac";
const char* password = "..........";
 
int ledPinRed = 15; // GPIO13
int ledPinGreen = 13; // GPIO13
int ledPinBlue = 3; // GPIO13 ok
WiFiServer server(80);
 
void setup() {
  Serial.begin(115200);
  delay(10);
 
  pinMode(ledPinRed, OUTPUT);
  pinMode(ledPinGreen, OUTPUT);
  pinMode(ledPinBlue, OUTPUT);
 digitalWrite(ledPinRed, LOW);
 digitalWrite(ledPinBlue, LOW);
 digitalWrite(ledPinGreen, LOW);
 
  // Connect to WiFi network
  Serial.println();
 Serial.println(VERSION);
   Serial.print("Connecting to ");
  Serial.println(ssid);
 
  WiFi.begin(ssid, password);
 Serial.println("sent");
  while (WiFi.status() != WL_CONNECTED) {
// Serial.println(WiFi.status);
    delay(500);
    Serial.print(".");
  }
  Serial.println("");
  Serial.println("WiFi connected");
 
  // Start the server
  server.begin();
  Serial.println("Server started");
 
  // Print the IP address
  Serial.print("Use this URL to connect: ");
  Serial.print("http://");
  Serial.print(WiFi.localIP());
  Serial.println("/");
 
}

  int valueRed = LOW;
  int valueGreen = LOW;
  int valueBlue = LOW;
 
void loop() {
  // Check if a client has connected
  WiFiClient client = server.available();
  if (!client) {
    return;
  }
 
  // Wait until the client sends some data
  // Serial.println("new client");
  while(!client.available()){
    delay(1);
  }
 
  // Read the first line of the request
  String request = client.readStringUntil('\r');
  Serial.println(request);
  client.flush();
 
  // Match the request
 
  if (request.indexOf("/RED=ON") != -1)  {
    digitalWrite(ledPinRed, HIGH);
    valueRed = HIGH;
  }
  if (request.indexOf("/GREEN=ON") != -1)  {
    digitalWrite(ledPinGreen, HIGH);
    valueGreen = HIGH;
  }
  if (request.indexOf("/BLUE=ON") != -1)  {
    digitalWrite(ledPinBlue, HIGH);
    valueBlue = HIGH;
  }

  
  if (request.indexOf("/RED=OFF") != -1)  {
    digitalWrite(ledPinRed, LOW);
    valueRed = LOW;
  }
  if (request.indexOf("/GREEN=OFF") != -1)  {
    digitalWrite(ledPinGreen, LOW);
    valueGreen = LOW;
  }
  if (request.indexOf("/BLUE=OFF") != -1)  {
    digitalWrite(ledPinBlue, LOW);
    valueBlue = LOW;
  }
  if (request.indexOf("/LED=OFF") != -1)  {
    digitalWrite(ledPinRed, LOW);
    digitalWrite(ledPinGreen, LOW);
    digitalWrite(ledPinBlue, LOW);
    valueRed = LOW;
    valueGreen = LOW;
    valueBlue = LOW;
 

  }
 
// Set ledPin according to the request
//digitalWrite(ledPin, value);
 
  // Return the response
  client.println("HTTP/1.1 200 OK");
  client.println("Content-Type: text/html");
  client.println(""); //  do not forget this one
  client.println("<!DOCTYPE HTML>");
  client.println("<html>");
 
 client.print("traffic light ");
 client.println(VERSION);
 
/*  if(value == HIGH) {
    client.print("On");
  } else {
    client.print("Off");
  }
 */


 client.println("<br>");
// setone(valueRed,"RED","ROUGE","rouge");
  if (valueRed==HIGH) client.println("<a href=\"/RED=OFF\"\"><button>rouge </button></a>");
   else client.println("<a href=\"/RED=ON\"\"><button>ROUGE</button></a>");
   
  if (valueBlue==HIGH) client.println("<a href=\"/BLUE=OFF\"\"><button>bleu </button></a>");
   else client.println("<a href=\"/BLUE=ON\"\"><button>BLUE</button></a>");
   
  if (valueGreen==HIGH) client.println("<a href=\"/GREEN=OFF\"\"><button>vert </button></a>");
   else client.println("<a href=\"/GREEN=ON\"\"><button>VERT</button></a>");

    client.println("<a href=\"/LED=OFF\"\"><button>ETEINDRE </button></a>");
 
  client.println("</html>");
 
  delay(1);
  // Serial.println("Client disonnected");
  Serial.println("");
 
}
AntiGuide: Esp8266NodeMcuWebServerTRVB
