AntiGuide: ArduinoMicroViaWeb

Editor

    Sketchbook
    Examples
    Libraries
    Monitor
    Reference
    Help
    Preferences
    Features usage

sketch_apr28a
You exceeded your current plan quota, you can only view your sketches. To make changes, upgrade your plan or delete something.
Upgrade Plan

    sketch_apr28a.ino
    ReadMe.adoc

 
Success: Saved on your online Sketchbook and done uploading sketch_apr28a

/home/builder/opt/arduino-builder/arduino-builder -compile -core-api-version 10611 -hardware /home/builder/opt/arduino-builder/hardware -hardware /home/builder/.arduino15/packages -tools /home/builder/opt/arduino-builder/tools -tools /home/builder/.arduino15/packages -built-in-libraries /home/builder/opt/libraries/latest -logger humantags -fqbn arduino:avr:micro -build-cache /tmp -build-path /tmp/005911788/build -verbose -prefs runtime.tools.arduinoOTA.path=/home/builder/.arduino15/packages/arduino/tools/arduinoOTA/1.3.0 -prefs runtime.tools.avr-gcc.path=/home/builder/.arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino5 -prefs runtime.tools.avrdude.path=/home/builder/.arduino15/packages/arduino/tools/avrdude/6.3.0-arduino17 -prefs runtime.tools.linuxuploader.path=/home/builder/.arduino15/packages/arduino/tools/linuxuploader/1.5.1 -prefs runtime.tools.nrf5x-cl-tools.path=/home/builder/.arduino15/packages/arduino/tools/nrf5x-cl-tools/9.3.1 -prefs runtime.tools.rp2040tools.path=/home/builder/.arduino15/packages/arduino/tools/rp2040tools/1.0.2 -prefs runtime.tools.serial-discovery.path=/home/builder/.arduino15/packages/builtin/tools/serial-discovery/1.1.0 -prefs runtime.tools.arc-elf32.path=/home/builder/.arduino15/packages/Intel/tools/arc-elf32/1.6.9+1.0.1 -prefs runtime.tools.core2-32-poky-linux.path=/home/builder/.arduino15/packages/Intel/tools/core2-32-poky-linux/1.6.2+1.0 -prefs runtime.tools.flashpack.path=/home/builder/.arduino15/packages/Intel/tools/flashpack/2.0.0 -prefs runtime.tools.CMSIS-Atmel.path=/home/builder/.arduino15/packages/arduino/tools/CMSIS-Atmel/1.2.0 -prefs runtime.tools.arm-none-eabi-gcc.path=/home/builder/.arduino15/packages/arduino/tools/arm-none-eabi-gcc/7-2017q4 -prefs runtime.tools.esptool.path=/home/builder/.arduino15/packages/esp8266/tools/esptool/2.5.0-3-20ed2b9 -prefs runtime.tools.xtensa-lx106-elf-gcc.path=/home/builder/.arduino15/packages/esp8266/tools/xtensa-lx106-elf-gcc/2.5.0-3-20ed2b9 -prefs runtime.tools.ctags.path=/home/builder/.arduino15/packages/builtin/tools/ctags/5.8-arduino11 -prefs runtime.tools.x86-linux-gcc.path=/home/builder/.arduino15/packages/arduino/tools/x86-linux-gcc/7.2.0 -prefs runtime.tools.arm-linux-gcc.path=/home/builder/.arduino15/packages/arduino/tools/arm-linux-gcc/4.9.3 -prefs runtime.tools.mkspiffs.path=/home/builder/.arduino15/packages/esp8266/tools/mkspiffs/2.5.0-3-20ed2b9 -prefs runtime.tools.i586-poky-linux-uclibc.path=/home/builder/.arduino15/packages/Intel/tools/i586-poky-linux-uclibc/1.6.2+1.0 -prefs runtime.tools.sketchUploader.path=/home/builder/.arduino15/packages/Intel/tools/sketchUploader/1.6.2+1.0 -prefs runtime.tools.CMSIS.path=/home/builder/.arduino15/packages/arduino/tools/CMSIS/4.5.0 -prefs runtime.tools.bossac.path=/home/builder/.arduino15/packages/industruino/tools/bossac/1.7.0-industruino -prefs runtime.tools.dfu-util.path=/home/builder/.arduino15/packages/arduino/tools/dfu-util/0.10.0-arduino1 -prefs runtime.tools.openocd.path=/home/builder/.arduino15/packages/Intel/tools/openocd/0.9.0+0.1 -prefs runtime.tools.arduino101load.path=/home/builder/.arduino15/packages/Intel/tools/arduino101load/2.0.1 -libraries /tmp/005911788/custom -libraries /tmp/005911788/pinned /tmp/005911788/sketch_apr28a

Sketch uses 3958 bytes (13%) of program storage space. Maximum is 28672 bytes.

Global variables use 149 bytes (5%) of dynamic memory, leaving 2411 bytes for local variables. Maximum is 2560 bytes.

Upload started

Programming with: Serial

Restarting in bootloader mode

Flashing with command:C:/Users/adminpo/.arduino-create/arduino/avrdude/6.3.0-arduino17/bin/avrdude.exe -CC:/Users/adminpo/.arduino-create/arduino/avrdude/6.3.0-arduino17/etc/avrdude.conf -v -patmega32u4 -cavr109 -PCOM12 -b57600 -D -Uflash:w:C:/Users/adminpo/AppData/Local/Temp/arduino-create-agent906840917/sketch_apr28a.hex:i

avrdude: Version 6.3-20190619

Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/

Copyright (c) 2007-2014 Joerg Wunsch

System wide configuration file is "C:/Users/adminpo/.arduino-create/arduino/avrdude/6.3.0-arduino17/etc/avrdude.conf"

Using Port : COM12

Using Programmer : avr109

Overriding Baud Rate : 57600

AVR Part : ATmega32U4

Chip Erase delay : 9000 us

PAGEL : PD7

BS2 : PA0

RESET disposition : dedicated

RETRY pulse : SCK

serial program mode : yes

parallel program mode : yes

Timeout : 200

StabDelay : 100

CmdexeDelay : 25

SyncLoops : 32

ByteDelay : 0

PollIndex : 3

PollValue : 0x53

Memory Detail :

Block Poll Page Polled

Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW MaxW ReadBack

----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------

eeprom 65 20 4 0 no 1024 4 0 9000 9000 0x00 0x00

flash 65 6 128 0 yes 32768 128 256 4500 4500 0x00 0x00

lfuse 0 0 0 0 no 1 0 0 9000 9000 0x00 0x00

hfuse 0 0 0 0 no 1 0 0 9000 9000 0x00 0x00

efuse 0 0 0 0 no 1 0 0 9000 9000 0x00 0x00

lock 0 0 0 0 no 1 0 0 9000 9000 0x00 0x00

calibration 0 0 0 0 no 1 0 0 0 0 0x00 0x00

signature 0 0 0 0 no 3 0 0 0 0 0x00 0x00

Programmer Type : butterfly

Description : Atmel AppNote AVR109 Boot Loader

Connecting to programmer: .

Found programmer: Id = "CATERIN"; type = S

Software Version = 1.0; No Hardware Version given.

Programmer supports auto addr increment.

Programmer supports buffered memory access with buffersize=128 bytes.

Programmer supports the following devices:

Device code: 0x44

avrdude: devcode selected: 0x44

avrdude: AVR device initialized and ready to accept instructions

Reading | ################################################## | 100% 0.00s

avrdude: Device signature = 0x1e9587 (probably m32u4)

avrdude: safemode: lfuse reads as FF

avrdude: safemode: hfuse reads as D8

avrdude: safemode: efuse reads as CB

avrdude: reading input file "C:/Users/adminpo/AppData/Local/Temp/arduino-create-agent906840917/sketch_apr28a.hex"

avrdude: writing flash (3958 bytes):

Writing | ################################################## | 100% 0.36s

avrdude: 3958 bytes of flash written

avrdude: verifying flash memory against C:/Users/adminpo/AppData/Local/Temp/arduino-create-agent906840917/sketch_apr28a.hex:

avrdude: load data flash data from input file C:/Users/adminpo/AppData/Local/Temp/arduino-create-agent906840917/sketch_apr28a.hex:

avrdude: input file C:/Users/adminpo/AppData/Local/Temp/arduino-create-agent906840917/sketch_apr28a.hex contains 3958 bytes

avrdude: reading on-chip flash data:

Reading | ################################################## | 100% 0.07s

avrdude: verifying ...

avrdude: 3958 bytes of flash verified

avrdude: safemode: lfuse reads as FF

avrdude: safemode: hfuse reads as D8

avrdude: safemode: efuse reads as CB

avrdude: safemode: Fuses OK (E:CB, H:D8, L:FF)

avrdude done. Thank you.

Upgrade plan