AntiGuide: ArduinoGrosseFatigue

// Pin 13 has an LED connected on most Arduino boards.
// give it a name:
int led = 13;

int sec=0;
int min=0;
int hour=0;
int day=0;

void setup()
{
   
   Serial.begin(9600);
}


void loop()
{
  
  delay(1000); ////delays are just for serial print, without serial they can be removed
  if (sec==0) { Serial.print("\ngrossefatigue : ");
  Serial.print (day);
  Serial.print (" ");
  Serial.print (hour);
  Serial.print (" ");
    Serial.print (min);
	}
	
    

   Serial.print (".");
  // 1 blink
  if (sec==0) {digitalWrite(led, HIGH);}  // turn the LED on (HIGH is the voltage level)
 //  Serial.println("On");
 
 if (sec==1) { digitalWrite(led, LOW);}    // turn the LED off by making the voltage LOW
   sec=sec+1 ;
   if (sec>59) {
       sec=0;
	   min=min+1;
	   if (min>59) {
	      hour=hour+1;
		  if (hour>23) {day=day+1;}
	   }
   }
}